Installation Guide

1. Drill a hole in the material matching the size required for the inch rivet nut (6-32 to 1/2-13).
2. Select the appropriate nosepiece on the RivetGo Pro Rivet Nut Gun – Inch for the rivet nut size.
3. Insert the inch rivet nut into the nosepiece, then position it into the pre-drilled hole.
4. Activate the pneumatic mechanism to compress and secure the rivet nut, then use the Reverse Forced Retreat Function to release the tool.

Technical Notes

• Ensure the air supply pressure is between 72psi and 101psi for optimal performance of the pneumatic mechanism.
• The Riveting Range (6-32 to 1/2-13) covers a wide variety of inch rivet nut sizes, suitable for most industrial applications.
• The tool’s pull force of 5620lbf to 7868lbf ensures secure fastening even in high-torque scenarios.
• Use with stainless steel rivet nuts to ensure compatibility and prevent corrosion over time.
• The 0.3in riveting stroke allows for efficient installation, but ensure proper alignment to avoid damaging the rivet nut or material.